Why IEC 60825 certification cannot be substituted for 21CFR1040

With a few exceptions, it is necessary for manufacturers, system integrators and importers of lasers or laser containing products to implement best practices for compliance with FDA 21 CFR 1040. This is because The Center for Devices and Radiological Health (CDRH) requests documentation using the current version of their Form 3632 Guide for Preparing Product Reports for Lasers or Products Containing Lasers for laser self-certification submittals, which have to comply with 21 CFR 1040. Per Section 1010.2c, certification has to be based on a test that meets the requirements set out in this standard and has to be in accordance with Good Manufacturing Practices.

Since the CDRH does not approve form 3632 reports or the products being reported; it is incumbent upon the manufacturer, system integrator or importer to assume responsibility for certification. However, if the FDA detects gaps or deficiencies in the applicant’s quality control or testing program; the CDRH is empowered to take actions that are of a very harsh nature. It may:

o  Ask the manufacturer to halt introduction of the product into the US until the faults are corrected

o  Require the manufacturer to start a corrective action program for products that have already been released into the market

o  Impose fines of up to $300,000 for non-compliance with the requirements laid out in 21 CFR 1040.

What are the consequences of recalls?

When laser products that the FDA determines do not meet the regulatory requirements are recalled, it can have serious consequences for the business. It invites lawsuits from the user of such products. This can result in monetary losses that eat into the business’ profits. It can also damage the company’s reputation, which is something that is very difficult to overcome and compensate for.

So, the ideal course to follow for manufacturers of laser products is to be compliant in letter and spirit with the regulations laid out in 21 CFR 1040. The ways of achieving this and implementing best practices for compliance with FDA 21 CFR 1040 will be the teaching a webinar from Compliance4All, a leading provider of professional trainings for all the areas of regulatory compliance, will be offering.

The speaker at this webinar is Tony Imm; a nationally recognized laser engineer with a background in medical device manufacturing, whose company, Laser Guardian LLC provides a wide range of laser safety and process support. To understand the ways by which to achieve compliance with FDA 21 CFR 1040 by implementing best practices; please register for this webinar by visiting Best Practices for Compliance with FDA 21CFR1040

Complete understanding of implementing best practices

Tony will give comprehensive understanding of the ways by which the test documentation system with the CDRH works. He will show how to generate form 3632 document, how to complete the form, what supporting data to attach with it and how, and then explain recommended methodologies to test and record the emission output and interlock performance of the laser systems. This session is extremely useful to those involved in working with laser products, such as Engineering Managers, Laser Engineers, Safety Manager, Safety Engineers, and personnel responsible for FDA communications.

Tony will cover the following areas at this webinar:

o  What is self-certification and when is it required

o  Methods for submitting a product report

o  Major sections of the product report

o  Why IEC 60825 certification cannot be substituted for 21CFR1040

o  What are best practices and why use them

o  Where to apply best practices and what they should encompass.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s